2 Strokes Down Under

In principle yes, but I've never even seen a TDR. I s'pose if the VPVS controller default jumpering is as per the TZR then it's a fair bet they're in a similar state of tune and the mod should produce the same result.

Cheers
Cam

Hi, I'm trying to fit a 2MA CDI to a 1KT but the 1KT loom has different connectors. The 1KT has square (6way & 3way) connectors whereas the 2MA uses circular (4way & 3way) water proof connectors. I'd prefer to use std connectors if at all possible. So I'm hoping someone can help with sourcin...

Controller modified as per the photos at this URL. http://s1379.photobucket.com/user/yamNoCam/library/?sort=3&page=1 The mod should change the PV operation range from approx 5850-10050 to 6000-8550 RPM. The bike does seem snappier partic 8-9k but hard to be sure; I believe this mod is supposed t...

Hi I'm wondering if any readers have modified PV controllers to adjust opening and closing RPM?
And if so could share details of their experience; in particular on a 1KT/2MA TZR, I hear that 6000->8600 is good for a 2MA?

Cheers
Cam

Gman, Thanks for the reply Do you mean Castrol TTS? I for no real reason, aside from the fact that it was avail at my local retailer decided on: Motul 710 2stk and Motul TransOil Expert 10w40 And yeah I'm with you wrt once decided sticking to that choice. PS: On the topic of HP gains (probably shoul...

Hi All,

Just a quick question re oils for a 2MA TZR.
What gear & 2stk oil would readers recommend for this bike?

Cheers
Cam

Why thank you.
Yes I believe it's OEM as per this one.

Thanks, I'm a little excited, it's been a long time between 2strokes. Pic attached, (from Steve and as viewed in Japan) it looks OK to me, sure it's not perfect and it's been fiddled about with but to be expected it's 30yrs old.

Yeah I did. Steve was easy to deal with, we had a chat, he sent me a few photos, it looked OK and deal done.

Gents thanks for the quick replies. I called Steve at Old Gold week before last and he's gunna call me back re a 1kt landing nowish. I've been looking on and off for a while. Trawling about on the i'net I found this website & figured I'd cast my net wider, partic among the converted. Just notice...

Hi I am looking for a TZR250 2MA or R1-Z. RWC and lowish ks if possible. Close to Melb would be preferable.

Cheers
Cam