Bare cyls, no head.
On 65.3mm so I would say you would want to bore to 65.5mm.
Bear in mind that a rebore would usually last 20,000 kms, so while these are quite large there is plenty of life them in them.
...and you can go to 66.5 on these with Banshee pistons, tho the liner is thin then. You could also reline them with banshee liners easily enough as there are no PVS to mess with like the RZ units.
Not ported that I can tell, in fact they are quite clean on the inside. Only selling as Im overspent and need to claw back some cash for my bike fund.
Email me for pics.
$SOLD
RD350LC cylinders 65.3mm SOLD
RD350LC cylinders 65.3mm SOLD
Last edited by JonW on Wed Sep 16, 2015 10:49 am, edited 1 time in total.
Re: RD350LC cylinders 65.3mm $350+post
I also found a 350LC head
Has had a blow up on one side but not that bad, only light marks to the surface, otherwise very sound.
$80
Has had a blow up on one side but not that bad, only light marks to the surface, otherwise very sound.
$80
Re: RD350LC cylinders 65.3mm $350+post
Ok, hot deal before I put these on ebay with a price rise and also cover my fees, $400 +post for the cyls with the head.