Sydney Road Ride: Sunday 10th of January

Ride days, get togethers, bike shows etc
Post Reply
wheels999
Expert Stroker
Expert Stroker
Posts: 260
Joined: Fri Sep 04, 2009 9:44 am
Location: Sydney, NSW

Sydney Road Ride: Sunday 10th of January

Post by wheels999 »

Anyone up for a ride up and down the Bell's line of Road on Sunday morning?

Proposed meeting place / start time: Richmond MacDonalds carpark 8.30am (Sunday, 10th of January).

Cheers, Markus.
w3a51l
Regular Stroker
Regular Stroker
Posts: 75
Joined: Sat Jul 18, 2009 1:00 pm
Location: Behind you, waiting for the salvage rights.

Re: Sydney Road Ride: Sunday 10th of January

Post by w3a51l »

Sorry, I've got the kids that day. :-(
hybrid
Site Admin
Site Admin
Posts: 1401
Joined: Tue Jun 16, 2009 2:34 pm
Location: Winsto, Sydney

Re: Sydney Road Ride: Sunday 10th of January

Post by hybrid »

I put a new fuel pump in mine today, along with some heat shielding over the top pipes. I have a feeling the fuel issue might have been a vapour lock with the fuel getting too hot.
Also reinforced the tray that supports the front fairing because it was cracking.

Hopefully I have sorted the fueling issue now, but I would like to ride the bike around a bit locally before I go on a long ride. Although it only seems to happen when the bike sits in traffic for a while, so maybe it would be ok.
RD350LC- RGV Mods, PWK28's
RZ500 - YZR Replica, PWK28's
wheels999
Expert Stroker
Expert Stroker
Posts: 260
Joined: Fri Sep 04, 2009 9:44 am
Location: Sydney, NSW

Re: Sydney Road Ride: Sunday 10th of January

Post by wheels999 »

hybrid wrote:I put a new fuel pump in mine today, along with some heat shielding over the top pipes. I have a feeling the fuel issue might have been a vapour lock with the fuel getting too hot.
Also reinforced the tray that supports the front fairing because it was cracking.

Hopefully I have sorted the fueling issue now, but I would like to ride the bike around a bit locally before I go on a long ride. Although it only seems to happen when the bike sits in traffic for a while, so maybe it would be ok.
Certainly sounds like you're on the right track with it being a heat related issue if it mainly happens in heavy traffic.

Probably best to test it out in both slow and regular conditions to see if its fixed properly.

Cheers, Markus.
hybrid
Site Admin
Site Admin
Posts: 1401
Joined: Tue Jun 16, 2009 2:34 pm
Location: Winsto, Sydney

Re: Sydney Road Ride: Sunday 10th of January

Post by hybrid »

Yeah.. hopefully the heat shielding sorts it, or I'm kinda screwed with very few options to further keep the heat away.

Its going to be a scorcher again tomorrow.. are you still going on the ride?
RD350LC- RGV Mods, PWK28's
RZ500 - YZR Replica, PWK28's
wheels999
Expert Stroker
Expert Stroker
Posts: 260
Joined: Fri Sep 04, 2009 9:44 am
Location: Sydney, NSW

Re: Sydney Road Ride: Sunday 10th of January

Post by wheels999 »

hybrid wrote:Yeah.. hopefully the heat shielding sorts it, or I'm kinda screwed with very few options to further keep the heat away.

Its going to be a scorcher again tomorrow.. are you still going on the ride?
I was hoping to... haven't been on a road ride since the Stinky Daze ride. Haven't had any takers so far, so I might can it.

Its a shame there are not many close-by options out West. When I used to live down South I was only 12 minutes from the National Park, which is always nice.

Decisions... decisions ;-)
hybrid
Site Admin
Site Admin
Posts: 1401
Joined: Tue Jun 16, 2009 2:34 pm
Location: Winsto, Sydney

Re: Sydney Road Ride: Sunday 10th of January

Post by hybrid »

I'll get mine out on the next cooler weekend and test it out. Although it probably needs a hotter day to test the vapour lock.
RD350LC- RGV Mods, PWK28's
RZ500 - YZR Replica, PWK28's
Hosewa
Occassional Stroker
Occassional Stroker
Posts: 20
Joined: Fri Nov 13, 2009 5:28 am
Location: Waterloo

Re: Sydney Road Ride: Sunday 10th of January

Post by Hosewa »

Markus,

Did you end up going? It was stinking hot today.

By the way, did you get the fuel venting issue sorted out on the VJ22SP you took out on the last ride?

Cheers
Cheers,

Mark
wheels999
Expert Stroker
Expert Stroker
Posts: 260
Joined: Fri Sep 04, 2009 9:44 am
Location: Sydney, NSW

Re: Sydney Road Ride: Sunday 10th of January

Post by wheels999 »

Hosewa wrote:Markus,

Did you end up going? It was stinking hot today.

By the way, did you get the fuel venting issue sorted out on the VJ22SP you took out on the last ride?

Cheers
Hey Mark,

No, didn't end up going. No takers and yeah... it was like 26 degrees at my place at 7.30am...

Haven't looked at the venting issue yet. Thanks for reminding me!


Cheers, Markus.
User avatar
Antman
Master Stroker
Master Stroker
Posts: 473
Joined: Sun Aug 30, 2009 7:08 pm

Re: Sydney Road Ride: Sunday 10th of January

Post by Antman »

Sorry I couldnt make it :roll:


Anyone heard from Karl???????????????
wheels999
Expert Stroker
Expert Stroker
Posts: 260
Joined: Fri Sep 04, 2009 9:44 am
Location: Sydney, NSW

Re: Sydney Road Ride: Sunday 10th of January

Post by wheels999 »

Antman wrote:Sorry I couldnt make it :roll:


Anyone heard from Karl???????????????
No... emailed him last week. No reply.

Cheers, Markus.
Post Reply