RGV & LC parts clearout

Got some parts to sell?
Post Reply
derek077
Newbie
Newbie
Posts: 9
Joined: Mon Nov 15, 2010 7:39 pm

RGV & LC parts clearout

Post by derek077 »

I'm having a workshop clearout and have boxes of LC and RGV parts

Freshly powder coated Yamaha baby blue LC frame and swingarm (partially delugged)
Wheels std x 3 and Astralites x 3 various sizes F 1.85 gold & 2.00 Silver and 2.5" Rear Black fresh powder and new bearings ALL SOLD
Rads x3 $30 each
Brand new Spondon 300mm floating race spec disks - awesome stopping power x2
AP Lockheed racing calipers x2
Hagon alloy LC shock with custom remote resevoir - ideal for massive road bike upgrade or for race bike
35mm Front end incl triples x 2
35mm clip ons
Brand new Hot Rods Banshee crank STD with bearings unused in box - $400 SOLD
RGV250 engine and chassis parts
VJ22 std pipes with cans - excellent condition
complete VJ22 road bike ready to go
Set of VJ22 stainless race pipes with carbon cans SOLD
VJ22 cylinder SOLD
some race fairing parts
VJ21 tank
boxes of other engine and chassis parts
TZ350 used geunine original front guard
TZ G used race seat unit
Will try get a better list over the weekend as I sort through it all
Have some very trick LC cylinders 'Willing' ported but illegal for racing I bored them to 56mm to run trick YZ pistons after a deap ring gauge ruined them at 54.5mm - awesome fast road cylinders with great midrange torque
Skimmed LC heads
LC gearboxes, clutches, etc
some parts listed on ebay but email with anything you need

http://www.ebay.com.au/itm/200655762980 ... 1555.l2649

Also have a brand new unused spare TZ350G Full race fairing and screen - bargain at $500 - cost $700
Need money to complete my 82 Spondon TZ project :o)

dez077@hotmail.com
Last edited by derek077 on Wed Oct 12, 2011 11:56 am, edited 1 time in total.
User avatar
hyside
Newbie
Newbie
Posts: 11
Joined: Thu Nov 04, 2010 6:31 am

Re: RGV & LC parts clearout

Post by hyside »

Intrested in the astralites and spondon discs.
redmistracer
Newbie
Newbie
Posts: 3
Joined: Sat Dec 31, 2011 11:57 pm
Location: Southern Sydney

Re: RGV & LC parts clearout

Post by redmistracer »

Is anything left???
RGV parts.
User avatar
Jeram
Master Stroker
Master Stroker
Posts: 677
Joined: Sun Oct 31, 2010 10:40 pm

Re: RGV & LC parts clearout

Post by Jeram »

rgv servo motor? Ignition coils?
the following 4T propaganda was brought to you by your local 2T lobby group...

"whats that youve got there?... a 450? "
yeah...
"what cereal packet did that come out of? "
huh?...
"I just wanted to know, because theres nothing worse than finding a piece of shit in the bottom of your corn flakes. "
mekros
Occassional Stroker
Occassional Stroker
Posts: 33
Joined: Fri Sep 09, 2011 9:54 am

Re: RGV & LC parts clearout

Post by mekros »

I know a couple of RGV guys down here in Melbourne if you need any bits Jeram
User avatar
Jeram
Master Stroker
Master Stroker
Posts: 677
Joined: Sun Oct 31, 2010 10:40 pm

Re: RGV & LC parts clearout

Post by Jeram »

ahhh cheers mate,

actually I need them up in newcastle for the mito380... but I think lozza has plenty of spares for now :)
the following 4T propaganda was brought to you by your local 2T lobby group...

"whats that youve got there?... a 450? "
yeah...
"what cereal packet did that come out of? "
huh?...
"I just wanted to know, because theres nothing worse than finding a piece of shit in the bottom of your corn flakes. "
2TInstitute
Master Stroker
Master Stroker
Posts: 693
Joined: Mon Sep 14, 2009 10:32 am

Re: RGV & LC parts clearout

Post by 2TInstitute »

RGv, coils, air solenoids, servos and TPS's are all handy items
mekros
Occassional Stroker
Occassional Stroker
Posts: 33
Joined: Fri Sep 09, 2011 9:54 am

Re: RGV & LC parts clearout

Post by mekros »

Is there anything that the man does not have? :P
User avatar
Jeram
Master Stroker
Master Stroker
Posts: 677
Joined: Sun Oct 31, 2010 10:40 pm

Re: RGV & LC parts clearout

Post by Jeram »

prices for coil and servo?
the following 4T propaganda was brought to you by your local 2T lobby group...

"whats that youve got there?... a 450? "
yeah...
"what cereal packet did that come out of? "
huh?...
"I just wanted to know, because theres nothing worse than finding a piece of shit in the bottom of your corn flakes. "
RMOztrailer
Newbie
Newbie
Posts: 4
Joined: Tue Dec 11, 2012 10:58 am

Re: RGV & LC parts clearout

Post by RMOztrailer »

Hi guys, I need a VJ22 carby body, TM34S I think?? Have one that some gorilla has snapped off the logs off the primary jet, then snapped off something inside the jet port!! Thanks in advance, moz
2TInstitute
Master Stroker
Master Stroker
Posts: 693
Joined: Mon Sep 14, 2009 10:32 am

Re: RGV & LC parts clearout

Post by 2TInstitute »

mekros wrote:Is there anything that the man does not have? :P
spare time
L.B.
Master Stroker
Master Stroker
Posts: 370
Joined: Mon Aug 29, 2011 7:08 pm

Re: RGV & LC parts clearout

Post by L.B. »

Def need the Hagon alloy LC shock with custom remote resevoir...
BRG1200
Veteran Stroker
Veteran Stroker
Posts: 1575
Joined: Fri Aug 21, 2009 2:28 am
Location: Adelaide

Re: RGV & LC parts clearout

Post by BRG1200 »

Hi Derek
Got any engine tie bars?
fairing frame for an 83/84 RZ 250 K (34J, 29L, 31K, 35G)
Ex UK, now in Adelaide. LC250/350. DT175. Shed full of sh1t in the vague form of dismantled rusty RD’s and RZ’s.
mekros
Occassional Stroker
Occassional Stroker
Posts: 33
Joined: Fri Sep 09, 2011 9:54 am

Re: RGV & LC parts clearout

Post by mekros »

2TInstitute wrote:
mekros wrote:Is there anything that the man does not have? :P
spare time
Holy thread revival 8O

To the other person that needs RGV carbs, I've got a set if you are interested.
Post Reply