throttle cable twin carbs

Looking for a part?
Post Reply
Link
Expert Stroker
Expert Stroker
Posts: 129
Joined: Mon Jan 18, 2010 3:19 pm
Location: Melbourne

throttle cable twin carbs

Post by Link »

Hi I need a throttle cable for twin mikunis. If someone has a spare. O418383958 Thanks Link
JonW
Veteran Stroker
Veteran Stroker
Posts: 2330
Joined: Sun Nov 15, 2009 8:43 pm
Location: Sydney
Contact:

Re: throttle cable twin carbs

Post by JonW »

Hi Link, cant help with the cable, but I dropped you a PM re cranks in case you havent seen it.

I would think if you dont need an oil line that there are a bunch of easy fit units out there from other bikes, plus this looked useful if you get stuck:

http://www.ebay.co.uk/itm/Venhill-Unive ... 2a3c8b9bee
hybrid
Site Admin
Site Admin
Posts: 1401
Joined: Tue Jun 16, 2009 2:34 pm
Location: Winsto, Sydney

Re: throttle cable twin carbs

Post by hybrid »

Have a look at Banshee setups.
I'm using two of them on my 500.

Plenty of them available.
RD350LC- RGV Mods, PWK28's
RZ500 - YZR Replica, PWK28's
pkay
Expert Stroker
Expert Stroker
Posts: 294
Joined: Thu Aug 01, 2013 3:46 pm
Location: Brisbane

Re: throttle cable twin carbs

Post by pkay »

I bought one from Yambits in the UK - cheap as
L.B.
Master Stroker
Master Stroker
Posts: 370
Joined: Mon Aug 29, 2011 7:08 pm

Re: throttle cable twin carbs

Post by L.B. »

If you mean like stock cables I got some 2nd spares. Can throw one in with the crank.
Just remove the oil pump cable at the splitter?
L.B.
Master Stroker
Master Stroker
Posts: 370
Joined: Mon Aug 29, 2011 7:08 pm

Re: throttle cable twin carbs

Post by L.B. »

If you mean like stock cables I got some 2nd spares. Can throw one in with the crank.
Just remove the oil pump cable at the splitter?
Link
Expert Stroker
Expert Stroker
Posts: 129
Joined: Mon Jan 18, 2010 3:19 pm
Location: Melbourne

Re: throttle cable twin carbs

Post by Link »

Hi thanks for the help . I ended up with an rz std item but had to mod the plasic block to get it up to 34mm carbs. A bit off the bottom a bit off the top and drilled a bit deeper on the cable grooves. All good now. Thanks
Post Reply