Replica LC2 Fairings

[14CHEEKS]

Morning all.....

I have been asked by someone in the US about buying a replica LC2 fairing.

The cost of postage would be the same for a 6Kg parcel and a 10Kg parcel - which would be around the £70 area (all depends on compensation value which is extra )

Now I reckon I could get maybe 3 or 4 of these fairings into one box.

If anyone is interested in asking around and ordering some,then it would work out cheaper for all involved.

I will look into the costs to send to Australia if there is enough interest.

I will be away for a month,so there is plenty of time to ask around.

Normally I sell these for £150,but I can do discounted prices for 3 or more fairings.

Cheers
Nick

[fred99999au]

Are they plastic or fibreglass? Are you only looking at the LC2 or are there other options there as well?

I am looking for some good fairings for an 85 RZ250/350.

[14CHEEKS]

These are made from polyurethane plastic - far superior material than the original.

Exact copy even down to the "Yamaha 31k" the inside.



Cheers
Nick

[Greasemeup]

Would be so nice to get these for the full fairing bikes, square headlight one for me.

I would happily pay AU 1000. for top, sides and belly pan in polyurethane.

[fred99999au]

yes, me too. Are you able to divulge the source of these units 14cheeks?

[BRG1200]

He IS the source of these units!
I have four of his other items, sidepanels and a couple of other things, they are perfect copies, moulds taken from immaculate panels, plastic far stronger than the original plastic. No question marks at all about the quality, it is really good gear.

[Greasemeup]

Confused.

What else is for sale and how much?

[14CHEEKS]

Sorry for the delay in replying here - been rather busy the past few months.

This is what I currently have for sale at the moment in the replica fairing side of things -

http://www.ebay.com.au/usr/14cheeks

I'm based in the UK.

Can give discount for bulk purchases.

High quality replica panels - moulded form either NOS parts or excellent 2nd hand parts. Produced in POLYURETHANE PLASTIC - far superior material than the original Yamaha stuff,more flexible and less likely to crack.

Cheers
Nick

[fred99999au]

Must have been a while since I checked this thread as there is nothing left.

I want a square headlight fairing set for an 85 RZ250 (RD250/350 N LC in UK speak). or depending on price maybe 2 sets.

[Greasemeup]

I want a square headlight fairing set for an 85 RZ250 (RD250/350 N LC in UK speak).

Me too!!