RZ 250 / 350 parts - UPDATED APRIL 2022
Posted: Mon Mar 02, 2015 11:10 am
UPDATED April 2022
I'm overspent again... so, to claw back some cash Im selling off a few of my parts...
Pics of much of this stuff are on my 2smoked.com website:
http://2smoked.com/For_Sale_parts_Yamah ... _YPVS.html
- set of NOS F1 bars, in yamaha packets, some storage marks. $old. These differ from both the N1 and the later F2 and N2 model bars. Very hard to find now as been long NLA. Contact me for pics SOLD
- Angel eye headlight - The spare unit from of a pair of BL Mini aftermarket headlights. I fitted the other side to my Hybrid LC. Naturally this is brand new in box and comes with globes and wiring. $35
- New in packet OEM RZ 83-85 Tank rubbers - 3TB-24181 - $20/pair
- NOS PV holder RZ250 29L-1131U $40
- RZ cylinders and carbs - see what is left on this link: http://www.2strokesdownunder.com/viewto ... f=8&t=2476
- Fully refurbished OEM RZ kickstarter, NLA new now from Yam. Rezinc'd green lever and crank, new or rezinc'd OEM fixings (washer/ball/spring/concial washer) as needed and new OEM Rubber. No slop in mechanism. NOS units sell for $250+ now. - $150.
- modified LC/RZ gear levers. These have the ball part removed to be used with a much better heim joint (easily available on ebay for about $5 for either left and right handed threads). You then use the OEM rod and can drill and fit another at the crankcase or reuse the OEM. They have been silver zinc'd but are not that bright. No toe rubber, but they are still available from Yamaha for $5. Few to choose from. $25 = forum discount, $35 on my site
- RZ 250 29L Complete top end - Cylinders with head, PVs and inlets - on 54.50mm but needs a rebore - $SOLD
- Rebored 54.25mm RZ250 29L cylinders. No PVs, pistons etc. Probably should have gone 1 size larger on rebore as you can see and very lightly feel a slight score on the wall on one of them, but will run ok as is and get ya outa trouble. SOLD
- RZ 250 51L complete top end - cylinders with head and PVs - needs a rebore, small blow up marks on one side of head. $SOLD
- Early (83/4) front brake caliper brackets with a few other spares, cleaned up and powder coated $40
- RZ 250/350 clutch cover (few to choose from) - $SOLD
- Early 83-85 RZ grab rail, freshly powdercoated in gloss black. Nice with no deep gouges or anything, ready to be fitted with bungs and put on your bike Good threads. Great for building special or if you dislike the chrome original. - $150
- RZ stainless steel head nuts and washers (These were from Legend in the uk, but now sold out), look to be CNC cut. - SOLD
- Early RZ (83/4) Rev counter - $115
- RZ250 carbs - Aussie 1GA version - $SOLD
- RZ250 83 fuel tank.... only kidding...!
- Early RZ wheels, bare units with paint removed, needing a polish and a paint but straight - SOLD
- Late RZ Swingarms - Choice from $75
- Rear number plate board - $SOLD
- Vitos CS350 crank seals - $25
- cush drive / sprocket carrier - $35 (choice of several)
- cush drive rubbers - $15 each
- Sumitomo rear caliper - SOLD
- Indicator self cancel / timer unit - $35 Choice of several
- N model clocks and headlight bracket, Really nice set of clocks in fully refurbished. light wrinkle black powdercoat and re decal'd top, Hard to find NOS OEM Yamaha clock ring/cushions, NOS Yamaha clock mounting rubbers, correct rezinc'd parts etc etc - SOLD.
- Round headlight model headlight bucket. Very usable. - $sold
- F1/2 model / RZ500 tinted screen, used with marks and small scratches, no cracks. Would polish up well I would think. NLA - USED on my Garage Art!
- F1/2 model / RZ500 clean and restored OEM style clear screen from Japan. While not perfect its very good. SOLD
- Aftermarket fibreglass 83/4 bikini fairing with coloured screen. Ugly and cut down a bit to fit on an LC I think, but would repair. NLA - Became Garage Art!
- Rivbolts - Replacements for if you remove the rivets holding the bikini cowl hinge when painting - $SOLD
- Yamaha RZ (all years) OEM air filter brand new in packet. $SOLD
- Aftermarket slightly raised (adjustable) clips ons (fits 85-on bikes) $75
- N2 triple clamps - $SOLD
- F1 Top Triple - $SOLD
- 250 RZ pistons, used and need new rings. Think they are OEM. Standard bore. Would get you out of trouble. $40 for the pair. - I have other used 250 and 350 pistons if you need to get out of a bind and cant wait for new ones.
- 86-on shock - also fits other RZs i think. looks ok, slight mark on shaft but not checked if its rust or dirt yet. was ok on bike, but owner swapped for ohlins which he told me 'was better', er, well... go figure LOL! $40
- aftermarket LC2/31K/29L rear light, great condition - $SOLD
- N/F2 Re zinc'd green rear light bracket - $95
- Lower triple, all years - one bent lock stop, powdercoated in the correct green colour to ape the original passivate- $75
... and maybe more stuff, stop back and I'll get some pics and add more over time.
I'm overspent again... so, to claw back some cash Im selling off a few of my parts...
Pics of much of this stuff are on my 2smoked.com website:
http://2smoked.com/For_Sale_parts_Yamah ... _YPVS.html
- set of NOS F1 bars, in yamaha packets, some storage marks. $old. These differ from both the N1 and the later F2 and N2 model bars. Very hard to find now as been long NLA. Contact me for pics SOLD
- Angel eye headlight - The spare unit from of a pair of BL Mini aftermarket headlights. I fitted the other side to my Hybrid LC. Naturally this is brand new in box and comes with globes and wiring. $35
- New in packet OEM RZ 83-85 Tank rubbers - 3TB-24181 - $20/pair
- NOS PV holder RZ250 29L-1131U $40
- RZ cylinders and carbs - see what is left on this link: http://www.2strokesdownunder.com/viewto ... f=8&t=2476
- Fully refurbished OEM RZ kickstarter, NLA new now from Yam. Rezinc'd green lever and crank, new or rezinc'd OEM fixings (washer/ball/spring/concial washer) as needed and new OEM Rubber. No slop in mechanism. NOS units sell for $250+ now. - $150.
- modified LC/RZ gear levers. These have the ball part removed to be used with a much better heim joint (easily available on ebay for about $5 for either left and right handed threads). You then use the OEM rod and can drill and fit another at the crankcase or reuse the OEM. They have been silver zinc'd but are not that bright. No toe rubber, but they are still available from Yamaha for $5. Few to choose from. $25 = forum discount, $35 on my site
- RZ 250 29L Complete top end - Cylinders with head, PVs and inlets - on 54.50mm but needs a rebore - $SOLD
- Rebored 54.25mm RZ250 29L cylinders. No PVs, pistons etc. Probably should have gone 1 size larger on rebore as you can see and very lightly feel a slight score on the wall on one of them, but will run ok as is and get ya outa trouble. SOLD
- RZ 250 51L complete top end - cylinders with head and PVs - needs a rebore, small blow up marks on one side of head. $SOLD
- Early (83/4) front brake caliper brackets with a few other spares, cleaned up and powder coated $40
- RZ 250/350 clutch cover (few to choose from) - $SOLD
- Early 83-85 RZ grab rail, freshly powdercoated in gloss black. Nice with no deep gouges or anything, ready to be fitted with bungs and put on your bike Good threads. Great for building special or if you dislike the chrome original. - $150
- RZ stainless steel head nuts and washers (These were from Legend in the uk, but now sold out), look to be CNC cut. - SOLD
- Early RZ (83/4) Rev counter - $115
- RZ250 carbs - Aussie 1GA version - $SOLD
- RZ250 83 fuel tank.... only kidding...!
- Early RZ wheels, bare units with paint removed, needing a polish and a paint but straight - SOLD
- Late RZ Swingarms - Choice from $75
- Rear number plate board - $SOLD
- Vitos CS350 crank seals - $25
- cush drive / sprocket carrier - $35 (choice of several)
- cush drive rubbers - $15 each
- Sumitomo rear caliper - SOLD
- Indicator self cancel / timer unit - $35 Choice of several
- N model clocks and headlight bracket, Really nice set of clocks in fully refurbished. light wrinkle black powdercoat and re decal'd top, Hard to find NOS OEM Yamaha clock ring/cushions, NOS Yamaha clock mounting rubbers, correct rezinc'd parts etc etc - SOLD.
- Round headlight model headlight bucket. Very usable. - $sold
- F1/2 model / RZ500 tinted screen, used with marks and small scratches, no cracks. Would polish up well I would think. NLA - USED on my Garage Art!
- F1/2 model / RZ500 clean and restored OEM style clear screen from Japan. While not perfect its very good. SOLD
- Aftermarket fibreglass 83/4 bikini fairing with coloured screen. Ugly and cut down a bit to fit on an LC I think, but would repair. NLA - Became Garage Art!
- Rivbolts - Replacements for if you remove the rivets holding the bikini cowl hinge when painting - $SOLD
- Yamaha RZ (all years) OEM air filter brand new in packet. $SOLD
- Aftermarket slightly raised (adjustable) clips ons (fits 85-on bikes) $75
- N2 triple clamps - $SOLD
- F1 Top Triple - $SOLD
- 250 RZ pistons, used and need new rings. Think they are OEM. Standard bore. Would get you out of trouble. $40 for the pair. - I have other used 250 and 350 pistons if you need to get out of a bind and cant wait for new ones.
- 86-on shock - also fits other RZs i think. looks ok, slight mark on shaft but not checked if its rust or dirt yet. was ok on bike, but owner swapped for ohlins which he told me 'was better', er, well... go figure LOL! $40
- aftermarket LC2/31K/29L rear light, great condition - $SOLD
- N/F2 Re zinc'd green rear light bracket - $95
- Lower triple, all years - one bent lock stop, powdercoated in the correct green colour to ape the original passivate- $75
... and maybe more stuff, stop back and I'll get some pics and add more over time.
