2 Strokes Down Under

Hi guys,

I am chasing a Left Hand Side engine cover for a RD 250 or 400 E, F or G, Alternator cover would also be a bonus but not essential.

I am unsure if earlier years are compatible, maybe someone here can advise however I thought the shape was slightly different to accommodate the CDI Ignition.

Thanks in advance

Ash

Only late model covers are suitable Ash. Old Gold did have one when I was last there but that was quite a while ago tbh.

The late model covers have a raised section at about the 5 o/c as you look at them from side on to the engine to accomodate the CDI pickup. Early cases don’t have this and thus won’t fit.

HTH

Thanks Mark,

I also put it out on Find a part this week and you’re right. Steve has one. He’s put it aside for me and I’ll hopefully get out there in the next week or so.

I’ll also shoot you a message with the parts as previously discussed.

Thanks again

Ash

Hey guys,

I am still chasing a LH engine cover for a CDI ignition 250/400 E, F or G engine, the one at Old Gold was damaged.

Any help would be greatly appreciated.

Thanks in advance

Ash