Looking for some LC parts
Looking for some LC parts
Wondering if anyone has any of these gathering dust at all?
Updated again:
- Battery flap
- Set of 350 Calipers - or at least the left side 'late' '350' unit... or perhaps a set of 83/84 YPVS calipers... even sans brackets as I have some?
- Rear 'subframe', cut is ok
- 'Front inner' rear mudguard - the one the shock goes through
- Ignition switch - doesnt have to have a key
- lift handle/grab bar
- grab rail - doesnt have to be pretty, road rashed is fine as I'll powder coat it
- Swinger pivot pin/spindle
- LC engine mounting plates
- helmet/seat lock unit - YPVS would be fine
- Inner Headlight bezel and fixings
I am also looking for the following frame brackets since my frame has been 'cafe racered' or 'bobber choppered'... or just 'plain fkered' lol...sigh...
- Side stand mount
- Centre stand mounts
- lower side panel mounts (both sides)
- Front lower oil tank mount (the round 'hinge' mount)
- Airbox mounts (both)
- Tie bar mounts (both)
I probably need other bits and bobs as well but thats what i can see is missing at the mo...
Updated again:
- Battery flap
- Set of 350 Calipers - or at least the left side 'late' '350' unit... or perhaps a set of 83/84 YPVS calipers... even sans brackets as I have some?
- Rear 'subframe', cut is ok
- 'Front inner' rear mudguard - the one the shock goes through
- Ignition switch - doesnt have to have a key
- lift handle/grab bar
- grab rail - doesnt have to be pretty, road rashed is fine as I'll powder coat it
- Swinger pivot pin/spindle
- LC engine mounting plates
- helmet/seat lock unit - YPVS would be fine
- Inner Headlight bezel and fixings
I am also looking for the following frame brackets since my frame has been 'cafe racered' or 'bobber choppered'... or just 'plain fkered' lol...sigh...
- Side stand mount
- Centre stand mounts
- lower side panel mounts (both sides)
- Front lower oil tank mount (the round 'hinge' mount)
- Airbox mounts (both)
- Tie bar mounts (both)
I probably need other bits and bobs as well but thats what i can see is missing at the mo...
Re: Looking for some LC parts
I have a couple of radiators in my spares box Jon and possibly the left switchgear
Re: Looking for some LC parts
That would be great Mark, its probably the same switchgear that I rejected as being 'too nice' last time we spoke. I should have just bought it from you then LOL.
Maybe i should pop up one day when youre not at work? Else always happy to have you drop round here if you happen to be working / flying in/out down our way etc
Maybe i should pop up one day when youre not at work? Else always happy to have you drop round here if you happen to be working / flying in/out down our way etc
Re: Looking for some LC parts
I will need to dig the radiators out of the lockup but the switchgear should be in my spares box which is easier to get to. I should be down your way sometime next week, so will text you to arrange swinging by.
Re: Looking for some LC parts
Updated again:
Updated again:
- [s]Battery box + flap[/s]
- 350 Calipers - or at least the left side '350' unit
- Rear 'subframe', cut is ok
- 'Front inner' rear mudguard - the one the shock goes through
- [s]'Rear inner' rear mudguard[/s]
- Ignition switch
- lift handle/bar
- grab rail - doesnt have to be pretty
- Swinger pivot pin
- LC engine mounting plates
- helmet / seat lock unit
Updated again:
- [s]Battery box + flap[/s]
- 350 Calipers - or at least the left side '350' unit
- Rear 'subframe', cut is ok
- 'Front inner' rear mudguard - the one the shock goes through
- [s]'Rear inner' rear mudguard[/s]
- Ignition switch
- lift handle/bar
- grab rail - doesnt have to be pretty
- Swinger pivot pin
- LC engine mounting plates
- helmet / seat lock unit
Re: Looking for some LC parts
Do you still need the switchgear and rad we spoke about before Jon?
I might be able to drop the switchgear off tomorrow on my way back from Canberra if you are around?
I might be able to drop the switchgear off tomorrow on my way back from Canberra if you are around?
Re: Looking for some LC parts
Yes please.
That would be wonderful Mark, let me know what time youre coming through and we'll sort it. You still have my number?
Re: Looking for some LC parts
Yes, let me see if I can find the switchgear before I head off this morning and I will call you to confirm
Re: Looking for some LC parts
List updated (I found a NOS swinger pivot bolt)
- Battery flap
- Set of 350 Calipers - or at least the left side 'late' '350' unit... or perhaps a set of 83/84 YPVS calipers... even sans brackets as I have some?
- Rear 'subframe', cut is ok
- 'Front inner' rear mudguard - the one the shock goes through
- Ignition switch - doesnt have to have a key
- lift handle/grab bar
- grab rail - doesnt have to be pretty, road rashed is fine as I'll powder coat it
- LC engine mounting plates
- helmet/seat lock unit - YPVS would be fine
- Inner Headlight bezel and fixings
I am also looking for the following frame brackets since my frame has been 'cafe racered' or 'bobber choppered'... sigh...
- Side stand mount
- Centre stand mounts
- lower side panel mounts (both sides)
- Front lower oil tank mount (the round 'hinge' mount)
- Airbox mounts (both)
- Tie bar mounts (both)
- Battery flap
- Set of 350 Calipers - or at least the left side 'late' '350' unit... or perhaps a set of 83/84 YPVS calipers... even sans brackets as I have some?
- Rear 'subframe', cut is ok
- 'Front inner' rear mudguard - the one the shock goes through
- Ignition switch - doesnt have to have a key
- lift handle/grab bar
- grab rail - doesnt have to be pretty, road rashed is fine as I'll powder coat it
- LC engine mounting plates
- helmet/seat lock unit - YPVS would be fine
- Inner Headlight bezel and fixings
I am also looking for the following frame brackets since my frame has been 'cafe racered' or 'bobber choppered'... sigh...
- Side stand mount
- Centre stand mounts
- lower side panel mounts (both sides)
- Front lower oil tank mount (the round 'hinge' mount)
- Airbox mounts (both)
- Tie bar mounts (both)