hi all
just want to know is it easy to retro fit rgv 250 wheels to the rg 500 so as to get modern rubber for the bike
rgv 250 wheels for rg500
Re: rgv 250 wheels for rg500
Did you get any response on this one as I am interested in ding the same upgrade.
Re: rgv 250 wheels for rg500
sorry mate
no joy
just have to search the net on other forums as it can be done but might gave to put the 250 front end on but
cheers mike
no joy
just have to search the net on other forums as it can be done but might gave to put the 250 front end on but
cheers mike
Re: rgv 250 wheels for rg500
Hey guys,
I think I can help with some of the info.
GHN in Germany make a rear wheel adaptor set as well as complete replacement wheel & adaptor sets (using 2nd hand RGV/GSXR wheels);
http://www.ghn-racing.de/AdapterRGV-RG.jpg
http://www.ghn-racing.de/produkt-e.html
Lance Gamma makes various versions of brake caliper adaptors which bolt onto the original forks;
http://www.lancegamma.com/PepsiRG14.jpg
http://www.lancegamma.com/GLRG15.jpg
http://www.lancegamma.com/CM01.jpg
http://www.lancegamma.com/MHWWG05.jpg
I've also got step by step guides on how to install an RGV250 vj22 swingarm (2 methods) if anyone is interested.
Cheers, Markus.
I think I can help with some of the info.
GHN in Germany make a rear wheel adaptor set as well as complete replacement wheel & adaptor sets (using 2nd hand RGV/GSXR wheels);
http://www.ghn-racing.de/AdapterRGV-RG.jpg
http://www.ghn-racing.de/produkt-e.html
Lance Gamma makes various versions of brake caliper adaptors which bolt onto the original forks;
http://www.lancegamma.com/PepsiRG14.jpg
http://www.lancegamma.com/GLRG15.jpg
http://www.lancegamma.com/CM01.jpg
http://www.lancegamma.com/MHWWG05.jpg
I've also got step by step guides on how to install an RGV250 vj22 swingarm (2 methods) if anyone is interested.
Cheers, Markus.
Re: rgv 250 wheels for rg500
Got some nice Dymags from the SV650, will let you know how easy to fit once customs let them go but from what I have been told, it is an easy fit.
-
- One Hit Wonder
- Posts: 1
- Joined: Sun Oct 25, 2020 7:19 pm
Re: rgv 250 wheels for rg500
Hi All, saw this thread and am hoping someone has this info as am part way through trying to fit an RGV wheel into an RG500G and its not working !!
Anyone know dimensions of spacers, sprocket carrier mods that may be required etc?
Fingers crossed as its now autumn and I will be 'hibernating' in my garage for the next few months
Anyone know dimensions of spacers, sprocket carrier mods that may be required etc?
Fingers crossed as its now autumn and I will be 'hibernating' in my garage for the next few months