2 Strokes Down Under

Hello 2 strokers,
I am wondering where I can buy a gasket kit for a KR250 A1 1984. Also chasing a seal for the water pump. Any feedback would be appreciated.

2strokeinstitute would be the one to know...

also, if you cant find the answer here, try the KR1 forums

whole oil pump... with seal???

http://www.ebay.co.uk/itm/Kawasaki-KR25 ... 722wt_1185

Base gaskets are still available fron Kawasaki for about $8.60. The substituted Part# is 11060-1389.

Hmm this is a timely thread, I have just emailed someone in the US about making some head gaskets based on a template. I am getting a price for some just for me and then a bigger order (he may do 20 cheaper than 2) for putting out there to other suckers, err I mean tandem twin owners.



Cheers,


Tony

kawasaki doesnt stock head gaskets anymore?

Jeram wrote:kawasaki doesnt stock head gaskets anymore?

Head Gasket- 11004-1120 is no longer available. Hasn't been available in Aus for abaout four years and is not available from Japan.

also why are you getting someone in the US to make the gaskets?

could you just get the right material and get it done at the laser cutters?

you could get quiet a few made for a hundred bucks

if it were any other bike there would be somebody somewhere who had a box full of KR250 gaskets stored away for a time like this...

There is someone in Sydney that will make a head gasket from copper. I dont have any contact details for them but someone might. Also I got copper head gaskets for my RG400 from Copper Gaskets Unlimited in the US for $50 plus postage last year. They will make you some if you have the original if not I can give you one.

Ridgecrest Engineering in Melbourne make copper gaskets, one off all the time. They supply all the drag boys so a sample to them should see your problem solved.
KZ1000 ones in varying thickness were about $50 three years ago

Item name: Ridgecrest Engineering
Street address: Factory 1 18 Collins Rd
Postcode: 3936
Town or Suburb: Dromana
State: VIC
GPS coordinates: -38.33305,144.98945500000002
Telephone(s): 03 59814334

Graham

There is some repo gasket kits on abay at the moment, seller is cruzinimage_au & cruzinimage_uk they are about $45 a set plus freight.
Dunno about the quality or anything.
Has anyone tried these?
Here's a pic

I have used their gaskets and pistns before without any issues but having said that I have not tried he KR gaskets. I would expect the head gaskets to be 50/50 as is usually the case with pattern head gaskets.

I reckon I'll give them a go, can only leak oil, or suck in a gut of air and lean out, blow up like it did on previous owner!