2 Strokes Down Under

Hi I will rebuild any bits of cranks or make one into two etc, provided all the bits are within spec saving you heaps and still getting a great crank. No dodgy work and I stand by my " RUNOUTS" when cranks are built by me they are within factory tolerence usually better. If you have crappy bits laying around call and see what we can sort out. Suzuki or Yamaha or anything else I will rebuild without the horrible prices of some shops.
Post Aus wide at cost, which helps a few on here.

I also offer porting and engine mods, race, road, performance etc.

I also want to buy yam and suzy cranks no matter how stuffed and can take that off a bill if you have some extras laying under the bench.

Or any two stroke parts in general or complete bikes, yam suzy honda call for instant sale!!


I am in VICTORIA near lilydale if that helps save a few questions!!!!!

Thanks Link o4l8383958

Gday Link,

Where are you based?


Cheers, Markus.

I've made this post sticky, because no doubt this will come in handy to plenty of people.

Ive got 5 Lc cranks and 1 Banshee maybe I should cut a deal.

Another good crank builder is Mike the bike in Nundell he's done some for me think labour was $250 I supplied all bearings and rods.

links says takes about 4hrs or less
so if he stands by his word he's the cheapest in australia

I reckon it took my uncle and I no more than 2 hours to do both of my 500 cranks, including alignment, and he had only ever done single cylinders.

hybid
if thats the case 160 for 2 cranks is dirt cheap as i was quoted in perth 180 per crank

I guess everyone has to make a quid or nobody would be in business!
You have to make the custom plates etc for pressing the cranks to start with, but if you know what you're doing, I can't see it taking much more than an hour.
We even replaced the bearings in the webs on my cranks, which most people don't do because its not easy to line it all back up again.

then thats the sign of a true craftsman

i got a RZ 250 crank you can have for postage plus a few bucks LMK if your interested and make a offer on it

Hey all, anyone know if Link is still doing this service on 2 stroke cranks? I have a couple of VJ21 RGV cranks that need work.

Another option:

www.crankshaftrebuildingservices.com.au/

link is not working.. seems the forum truncates it. the middle bit is: crankshaftrebuildingservices

JonW wrote:seems the forum truncates it.

Nah, that's because he just copied the text from another post instead of right clicking and copying the link itself.
The website does shorten the text of links so they don't take up a whole page, but the link itself is unchanged.

I edited the link to fix it.

Link works for me