2 Strokes Down Under

Hi gents ,

I am selling some nsr300 barrels with near new wiseco Pistons $600 , heads $100 a race ignition $400 and rs38mm carbs $600 .

Happy to discuss , email nealgreyplumba@hotmail.com for pics please

Hi there ,

I am looking for any seized/damaged nsr150 cylinders .

Thanks , Neal

Hi Pat ,

Let me know if they don't sell and we can do a deal .

All the panels are different , tank included . You can buy bodywork pieces on yahoo or do a tyga conversion .
How much is the bike if I may ask ?

I am trying to decide myself if I want a nsr as a road bike .

Get a mate to help you , pull the plugs out , put a drill and socket onto the flywheel , spin it and check for power at every joint along the way . Take it from there and see what happens , you should find the problem . Used pgm's are expensive and are 20 years old , a replacement one could pop 1 mo...

On the stock set up , it will need all 4 lobes to send signals to the pgm . There could be a problem with the pgm sending the signal to the spark plug .

Give me a shout if you need a pgm3 , my mate may have a spare one and I could pass on his details to you .

Fair play

Are you able to test your pgm on a mates bike ? Only modify the flywheel after you have either unit in your hands . It will be the 3rd lobe from the left that you want . You select the single lobe setting on the ignitech ( for eg ) , and set the limits for the powervalve motor and then it is almost ...

The only difference between the flywheels is the amount of advance . Like the other chaps are saying - if you have tested everything along the way it may be that your pgm has cooked . Any mates to swap units to test ? It takes 1 min to plug it in , hold that non firing plug , kick it and see what ha...

It was the 3rd lobe on my flywheel , the rest came off .

Just trace the loom along the way and check for spark at different locations . Check at the connections .

When you want more power or if you PGM has cooked then get a ignitech .
I went the single lobe as it was the easiest thing for me to do . You use 1 small little 5mm ish lobe

A good man !

Hi Lozza ,

how did the conversion work out ?

Good day mate ! About the ignitech unit , I have one on my nsr , between my friend and I we could not get it to run . I eventually ground off the extra lobes on the flywheel and ran it with 1 lobe . It seems to work ok and is getting better as we fine tune it . My mate tried to fit one on his mc21 ....