Custom throttle cables

[hybrid]

Does anyone know somebody who can make custom throttle cables?
When I switch to carbs on my 500, I'm going to need a 1 into 4 throttle cable.

[twinrock]

hey jeff hows things..with patience u can make your own... cables and splitters should be available from many rep bike shop, a tip is use god solder..i use silver solder very strong

[hybrid]

I guess I could use 3 of the 500 type twin cable splitters.
Split into two.. one for each side, then put another splitter on each side to go into 4.

[peet]

you could use rg500 lowers cables & rz500 upper & oil cable
had to space out the oil adjuster a bit
was a easy job & lenth worked out to be good

peet

[hybrid]

I've made a custom oil cable already because my PV controller is up the front.
Thinking about it again, it will probably be a must that I use the first RZ splitter to include the oil cable so I don't have to change anything there. Then just split again for each side.

[CBR600]

general auto cables liverpool 97300487 no web site. ( did my dt200 bigger carb upgrade perfect job however expensive cost 80 bux for 1 cable and i supplyed one of the ends)
shop 2 is
con wire milperra 02 9774 2155
http://www.conwire.com.au/

[hybrid]

Thanks mate.