recommendation for a cylinder boring in Melbourne

fred99999au · Post by **fred99999au** » Fri Feb 08, 2013 12:22 pm

Hi All. Need a recommendation for a cylinder boring in Melbourne.

Anyone have a good lead? air cooled single cylinder 86mm piston size.

Jeram · Post by **Jeram** » Fri Feb 08, 2013 2:32 pm

plenty of places will be able to do it for you, but if your struggling I can take it with me to shepparton in a couple of weeks and get it done for you as the guys up there do a good job for a very good price

s4oz · Post by **s4oz** » Sat May 25, 2013 10:14 am

Hello all
Just seized rear right cylinder in my RZ500 restoration.

I would like to have someone look at it and bore/hone as needed.

As per OP question, I am looking for a reliable shop in Melbourne, prefer South 'burbs.

Thanks in advance.

fred99999au · Post by **fred99999au** » Thu May 30, 2013 11:35 am

Cant help in the south, but had my 400D cylinder bored at Hoppers Crossing and it looks like they did a nice job. Just waiting for bearings to assemble the cases and then I will know for sure.

I can find the mob if you need. Most engine re-conditioners should be able to help.

2 Strokes Down Under

recommendation for a cylinder boring in Melbourne

recommendation for a cylinder boring in Melbourne

Re: recommendation for a cylinder boring in Melbourne

Re: recommendation for a cylinder boring in Melbourne

Re: recommendation for a cylinder boring in Melbourne