2 Strokes Down Under

I am selling my RG250. Its a power valve model mk3. It has a replacement used Japanese motor fitted and runs great. It has new tyres etc but the bike will need a paint. All the body work is there including the hard to find fully enclosed belly pan. I am looking for $1500 for the bike and will break it up if there is enough interest.
I also have a spare motor that has a rebuilt crank and has been rebored. The motor has never been started as I could not find a flywheel and eventually bought the used motor and just put the whole thing in instead. I also have a spare set of fairings again including the hard to find fully enclosed belly pan and a good few other bits and pieces. I would need about $450 for the motor alone to cover the cost of the genuine parts in the motor and send me a pm about the rest of the stuff if your interested.

I also have another motor but its only good for parts. Barrels are there including the PVs needing a rebore the crank is free but would need a strip and the head is there gearbox and crank cases but that's about it. All together in one piece. $75

I'll take the bottom end Pat

Cheers Lozza. The crank is good but will need to be stripped due to sitting around and dust etc collecting on it.

Second motor is sold. One complete rebuilt one left

I am interested in your bike, spare motor and fairings, can you send me pictures ? would you be able to crate and ship ? I am in Canada, have an 87 mk III full fairing , just leaned out engine , needs crank work, pistons and rebore. Can not get parts locally,your engine would be cheaper, and could always use a second in the stable
Thanks
Dave

Hmmmmmmmmmmmm

When you coming up this way Pat? (I have operatives in Winnipeg too )

Hopefully next week Lozza. I got your message about the pictures too, cheers. I had already seen them but did find another couple.

This is still for sale, I will part it out if people want bits. All there except for the belly pan now as I need it for my WW model.

Is the rebuilt motor still for sale? If so PM me the figure you're looking for. I take it that it is the powervalve version?

No the motor is gone only the bike and some other random parts are left.