.
Posted: Thu Feb 25, 2010 10:39 pm
...
Hey Alex welcome to the forum.
Ant
2 Strokes Down Under
The 2Stroke website for the Southern Hemisphere
https://www.2strokesdownunder.com/
.
Page 1 of 1
Re: 2005 R6 swingarm & caliper - RZ conversion
Posted: Fri Feb 26, 2010 7:49 pm
.
Posted: Sat Feb 27, 2010 11:57 pm
...
Re: 2005 R6 swingarm & caliper - RZ conversion
Posted: Sun Feb 28, 2010 9:47 am
This would have been great on my 500, but about 2 years too late 
Re: 2005 R6 swingarm & caliper - RZ conversion
Posted: Mon Mar 01, 2010 3:20 pm
It does look good dosen't it
.
Posted: Mon Mar 01, 2010 8:52 pm
...
Re: 2005 R6 swingarm & caliper - RZ conversion
Posted: Tue Mar 02, 2010 9:17 am
Hmmm, ya reckon I could make it fit in an RD350LC frame ?
Re: 2005 R6 swingarm & caliper - RZ conversion
Posted: Tue Mar 02, 2010 5:21 pm
Swinger will be way too long.
Mine is much harder to wheelie since I put the RGV one on mine.
Mine is much harder to wheelie since I put the RGV one on mine.
.
Posted: Tue Mar 02, 2010 9:22 pm
...
Re: 2005 R6 swingarm & caliper - RZ conversion
Posted: Wed Mar 03, 2010 6:45 am
On the LC you also have to either convert to vertical shock as I did on mine, or weld a bracket to the top of the swingarm brace to take the horizontal shock.