2 Strokes Down Under

...

If you follow the PayPal claim process you will have your money back

Sounds like another toe rag.

sorry to here your part arrived in poor cond.
i do plastic welding with out heat so it does not go brittle
good on abs
im about to do some rz500 panels & lower fairings for a rg500 ill happly rebuild your fender .
there shouldt be much work in it.
cheers peet

...

yes thanks it has arrive safly
send me a pic . you might be surprised whot can be built out of nothing



dont know if the photo link will work but ill try .

where the lower fairing comes up around the clutch housing all that was missing & allmade of plastic +i added in seat cowel upside down to extend the lower all plastic.


cheers peet

...

Hey Peet,
Can you do custom duck tails / seat cowl etc ???
I really want to do something a little diff for a 350LC bum using LED Tail light and LED Indicators so I can bring in the rear overhang a bit.

yep almost anyting
i us a old panel cut out whot i like say a air vent & graft them into another panel .
i dont need to use bog or fiberglass as i can build up layers of plastic mixed with a carbon fiber dust .
its taken awhile to figer acheaper methed out
there are products such as plastfix. but to 30 mills of there liquid is about 30 bucks & that just for the liquid
there plastic is set very hard & hard to shape & where it joins the plastic is now a weak point
its good but ive got acheaper methed
we all like cheper products that give same results
but all your doing is cutting & pasting filling in
ill pm you my# & you could probly do most of this your self
cheers peet

Homebush fibre glass do a TZ style seat,or you can recess your stop light its a pretty standard mod.

However Rgv ducktail looks sweet too.

Im actually thinking of going a fair bit thinner than normal too as well as recessing the tail light. A bit like that black special on the "colours" page with the cut down pipes but not as minimalist so it can still go well on the road.