2 Strokes Down Under

some on here i know already great site jeff...

well after selling my beloved mito420cc
http://s36.photobucket.com/albums/e47/t ... om2047.jpg
i had to at least replace my daily transport..i found a tzr in a back yard with 25tho kms on the clock it was all there but farings a lil ruff and faded.. and wouldnt start...
i really like the lil tzrs its a great all round bike...well the project took me 3 and ahalf days to complete a new record for me..

hope u dig it...
http://s36.photobucket.com/albums/e4...t=P1000482.jpg
http://s36.photobucket.com/albums/e4...t=P1000484.jpg
http://s36.photobucket.com/albums/e4...t=P1000487.jpg
the mods are..

ducati monster seat...
yzf450 light
after market rear sets
new indecators
led tail light
rg250 chambers modded to suit
hudraulic clutch
r1 caliper
braided lines
frame stripped modded and 2 pac..
tank and guards and light 2 paced
new tires and brake pads..
this was all done by me in just under 4 days..with the exception of buying the lights and rear sets previously...

Your links didn't work... I assume its this one from your bucket.

Thats a great effort and done in record time. I like it. The Monster seat looks great.

oh thanks hybrid for the link help....
the monster seat was almost ment to fit the bike very lil had to be done...there was no actual cutting of the seat just added a bracket..and the cool thing is all the tzr boxes fit in the tool compartment in the seat

I saw the bike yesterday and it is a nice job and well built.

Nice looks like your mito!!

A nice touch are is the hydraulic clutch which can be had for about $50 off evilpay they do look very cool.

I've been wanting to change my LC and 500 to hydraulic clutches.
What model are you getting on ebay for $50?

A couple of those in black would be alright.

The clutch lever looks a bit short.. have you fitted one yet?
Also not sure if I would fit it on the 500.. not much room to the frame.

Is there enough room for the cable? The hydraulics do the work don't they, for $50 they are worth a punt.

Yeah there is enough room for the cable, but its pretty tight.
Its the larger part where the line connects to the slave cylinder that I'm concerned about.
Not worried about the clutch being heavy with the lever being short... its just going to look weird.