Page 1 of 1
RGV/RS 250's
Posted: Mon Sep 14, 2009 10:42 am
by 2TInstitute
Whom wants to know the secret of keeping the PV's in check.....permanently?
Re: RGV/RS 250's
Posted: Mon Sep 14, 2009 4:25 pm
by w3a51l
Sure, I'll bite. Please share.
Re: RGV/RS 250's
Posted: Tue Sep 15, 2009 11:06 am
by 2TInstitute
First is start with a good power valve, if the hole in the end of the valve is elongated , throw it away !
Machine a replacement collar out of bronze/brass. The hardened shaft then bears on the brass/bronze not on the 'cheese' aluminium. Much more positive operation and they never go out of adjustment.
Replace the cable plate screws with allen heads(you will destroy the phillips heads getting them out anyway) you'll be sweet
Re: RGV/RS 250's
Posted: Thu Mar 17, 2011 5:21 am
by eastoegp
OK that seems a good tip from 18 months ago.
anything else?
Re: RGV/RS 250's
Posted: Mon Mar 21, 2011 9:54 am
by 2TInstitute
As far as power valves or in general?