Page 1 of 1

Stroker work update.

Posted: Wed Feb 22, 2012 7:49 pm
by strokerman
Got my 500 as mentioned in the bike mover posts I did earlier. I'll move current info here to the correct forum. Said to be a 2 owner machine. Done quite a bit of work to it , general tidy up and working through it learning whats what. She's had a pro tune up by the old bike shop boys, pulled and stripped carbs and changed jets, but she still needs more. Got rego and COF for Qld. Tanks and side cover have all been pulled and sent to fat budda's chop shop for metalic spitfire black pro paint job. I know some will say its no longer 74 original but I personally are not a fan of the candy colors, for me anyhow. She is going to be black and chrome only. Got the red infill in the "500" and "Suzuki" badges now chrome . Got a pro made black sheeps skin cover on seat for comfort in hot Qld - saves getting a bad sweat rash up the backside on hot long rides. Its been a good op to go over everything while the tanks are off. New fuel lines, tidied up wiring, petcock seals, indicators, tightened up all nuts and bolts gently! - (aluminium strips VERY easily). Think I'll ditch the basket carrier and replace it with the bar type only. Here's some pics. More next week when the tanks are back. When I get it all going I'll try and hook up with the local 500 boys & chew the 500 fat.

cheers

strokerman

Re: Stroker work update.

Posted: Wed Feb 22, 2012 8:47 pm
by ken007
gday, thats a nice looking bike you have, good to see another brisbanite on here.

Re: Stroker work update.

Posted: Wed Feb 22, 2012 9:01 pm
by strokerman
ken007 wrote:gday, thats a nice looking bike you have, good to see another brisbanite on here.
Cheers mate. Whatcha got?

Re: Stroker work update.

Posted: Thu Feb 23, 2012 7:19 am
by ken007
im into my yamahas, i get around on an old xj650 but am restoring a 81 350lc back to a near new state, heres a couple of photos,i never let the chance for a photo slip by, see ya

Image
Image
Image

Re: Stroker work update.

Posted: Thu Feb 23, 2012 8:42 am
by strokerman
Like that 650 - nice!

Re: Stroker work update.

Posted: Thu Feb 23, 2012 10:07 am
by 2TInstitute
NO YAMAHA'S in the SUZUKI section :)

Re: Stroker work update.

Posted: Thu Feb 23, 2012 2:36 pm
by EPApolice
They are just trying to raise the standard of this section.

Re: Stroker work update.

Posted: Thu Feb 23, 2012 2:50 pm
by 2TInstitute
A Virago ???? The Hammamatsu faithful can hold their own :)

Re: Stroker work update.

Posted: Thu Feb 23, 2012 7:29 pm
by ken007
yes you are right i shouldnt have put the yammy here, i cant see any virago's,got a bit of attention though