Page 1 of 3
RZ/LC barrels and parts
Posted: Wed Jan 16, 2013 9:48 am
by EPApolice
I have plenty of RZ and LC barrels that I want to get rid of. They are all 250 items but most of the RZ ones have the PVs still fitted. Bore size varies. Being offered here before ebay then the scrap bin. I also came across a pile of wheels mostly 250LC wheels and some AC RD wheels, the guy wants $20 each and again get in quick because he already sent one skip full for scrap. Some have sprockets and discs still fitted.
I also have various RZ and LC parts to go so if you need anything let me know I have two utes full of parts
Re: RZ/LC barrels and parts
Posted: Wed Jan 16, 2013 2:28 pm
by ken007
PM sent, ken
Re: RZ/LC barrels and parts
Posted: Wed Jan 16, 2013 3:57 pm
by 2TInstitute
Any decent 250 barrels Pat?
Re: RZ/LC barrels and parts
Posted: Wed Jan 16, 2013 4:04 pm
by L.B.
PM sent...
Re: RZ/LC barrels and parts
Posted: Wed Jan 16, 2013 4:33 pm
by BRG1200
Sending for scrap!?!?!
Whip-round anyone?
Re: RZ/LC barrels and parts
Posted: Wed Jan 16, 2013 5:51 pm
by EPApolice
I will measure some up tomorrow Lozza and let you know what bore size they are.
Re: RZ/LC barrels and parts
Posted: Thu Jan 17, 2013 7:04 am
by EPApolice
Some pictures Heaps of barrels Lozza, some are standard bore and up to 1mm over
Re: RZ/LC barrels and parts
Posted: Thu Jan 17, 2013 7:06 am
by EPApolice
Re: RZ/LC barrels and parts
Posted: Thu Jan 17, 2013 7:10 am
by EPApolice
Grab rails, engine cases, gearboxs, clutchs, footpeg hangers the list goes on and on
Re: RZ/LC barrels and parts
Posted: Thu Jan 17, 2013 7:33 am
by hybrid
Only LC stuff? No RZ engine cases?
Re: RZ/LC barrels and parts
Posted: Thu Jan 17, 2013 7:53 am
by EPApolice
I have two sets of bare RZ cases, one set is good and one set has the usual damage where the chain came off. Still useable though which ever you want. I am just in Seven Hills so you could walk over.
Re: RZ/LC barrels and parts
Posted: Thu Jan 17, 2013 10:02 am
by EPApolice
Two RZ tanks 31K model, both need repair.
Re: RZ/LC barrels and parts
Posted: Thu Jan 17, 2013 12:00 pm
by 2TInstitute
How much for 2 sets of cylinders Pat or how much for all the 2 fiddy's
Re: RZ/LC barrels and parts
Posted: Thu Jan 17, 2013 5:48 pm
by OzzyElsie
EPApolice wrote: some AC RD wheels, the guy wants $20 each and again get in quick because he already sent one skip full for scrap. Some have sprockets and discs still fitted.
Has this guy still got the wheels? I'm after a RD a/c front wheel, preferably with disc.
Re: RZ/LC barrels and parts
Posted: Thu Jan 17, 2013 8:03 pm
by EPApolice
Will check tomorrow, he did have some C/D cast ones but no discs
