.....polish it up to have a nice shiny allot swinger for the LC?
It is off an IT175G. Looks close enough to be doable. About 20mm longer and the top of the triangle is not a direct line up. Pivot axle is the same. Some fool drilled the swingarm to mount pillion pegs - on an IT
Re: Whatcha Reckon....
Posted: Fri Jun 24, 2016 11:55 pm
by JonW
Have a look at 2strokebrit's threads on the rdrz500 forum, he did this (or something v similar) and it took a bit of cutting.