It is off an IT175G. Looks close enough to be doable. About 20mm longer and the top of the triangle is not a direct line up. Pivot axle is the same. Some fool drilled the swingarm to mount pillion pegs - on an IT
Whatcha Reckon....
Whatcha Reckon....
.....polish it up to have a nice shiny allot swinger for the LC?
It is off an IT175G. Looks close enough to be doable. About 20mm longer and the top of the triangle is not a direct line up. Pivot axle is the same. Some fool drilled the swingarm to mount pillion pegs - on an IT
It is off an IT175G. Looks close enough to be doable. About 20mm longer and the top of the triangle is not a direct line up. Pivot axle is the same. Some fool drilled the swingarm to mount pillion pegs - on an IT
"A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." - George Fitch Atlanta Constitution, 1916
Re: Whatcha Reckon....
Have a look at 2strokebrit's threads on the rdrz500 forum, he did this (or something v similar) and it took a bit of cutting.