What performance from standard 350LC ?

Post by **hybrid** » Wed Apr 07, 2010 8:39 pm

R1 front end is a bit heavy for an LC in my opinion.

Antman · Post by **Antman** » Wed Apr 07, 2010 8:44 pm

My thoughts when someone put one on a mito.....................oversprung you know him.

DOC03 · Post by **DOC03** » Wed Apr 07, 2010 10:17 pm

Antman · Post by **Antman** » Wed Apr 07, 2010 10:29 pm

TZR 250 front and rear is very popular too looks rather nice.

Post by **hybrid** » Thu Apr 08, 2010 11:58 am

http://www.winsto.net/piggie

there are links to the LC project there.
Some of the pics were broken as the website has moved around a few times.
I used to have the pics hosted on optus while they were my ISP. After I closed my account, the webpage remained for years.. obviously they don't clean up much.
I forgot they were there, and Optus removed the files and I lost them all.
Thankfully a guy had archived my website for his own project and had most of the images. There are still a couple missing, but they're gone for good.

DOC03 · Post by **DOC03** » Thu Apr 08, 2010 12:42 pm

Cool, thanks for the link, im still toying with the suspension set ups.

DOC03 · Post by **DOC03** » Fri Apr 09, 2010 12:06 am

2TInstitute · Post by **2TInstitute** » Fri Apr 09, 2010 2:16 am

After looking at a RG/RGV hybrid I am convinced the RG frame is best, with the RGV front and rear ends. Make the 5 hundy look right and there is no notching the frame in key areas.You can always 'Dare to be different' as this fellow did in Japan. RGV tail RS 250 tank/fairing,gixxer 400 wheels,swing arm ,forks and brakes one of the best looking period.

Post by **hybrid** » Fri Apr 09, 2010 10:02 am

DOC03 wrote:Almost be worth picking this is for all the gear ???
Or use it to put an RG500 motor in ???

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... K:MEWAX:IT

Make sure its still got compliance plate etc if you want to put it back on the road. Otherwise you could use the bits from it.

Post by **hybrid** » Wed May 05, 2010 11:58 pm

Hey did you guys end up getting your Zeeltronics going?

DOC03 · Post by **DOC03** » Thu May 06, 2010 2:28 pm

2TInstitute · Post by **2TInstitute** » Sat May 08, 2010 9:36 am

hybrid wrote:Hey did you guys end up getting your Zeeltronics going?

I did an install of the latest PCDI-20V on a RS 250 during the week, bike is out at EC this weekend.
Customer was quite chuffed with the 1st gear power mono's , install was a doddle,

Sounds good Pete.

DOC03 · Post by **DOC03** » Sat May 08, 2010 10:36 am

DOC03 · Post by **DOC03** » Tue May 11, 2010 11:41 am

Antman · Post by **Antman** » Mon May 24, 2010 10:13 pm

So what exactly are you getting done?

2 Strokes Down Under

What performance from standard 350LC ?

Re: What performance from standard 350LC ?

Re: What performance from standard 350LC ?

Re: What performance from standard 350LC ?

Re: What performance from standard 350LC ?

Re: What performance from standard 350LC ?

Re: What performance from standard 350LC ?

Re: What performance from standard 350LC ?

Re: What performance from standard 350LC ?

Re: What performance from standard 350LC ?

Re: What performance from standard 350LC ?

Re: What performance from standard 350LC ?

Re: What performance from standard 350LC ?

Re: What performance from standard 350LC ?

Re: What performance from standard 350LC ?

Re: What performance from standard 350LC ?