fitting Boysen reeds to a Mito

doobie · Post by **doobie** » Fri Apr 08, 2011 5:07 pm

when fitting Boysen reeds to the Mito, is it a straight swap for the original reeds? will i need anything else to fit?

2TInstitute · Post by **2TInstitute** » Sat Apr 09, 2011 12:15 pm

A V Force reed block

maddad · Post by **maddad** » Sun Apr 10, 2011 10:12 am

yes i need more mito stuff.good luck

Jeram · Post by **Jeram** » Sun Apr 10, 2011 2:43 pm

+1 Vforce

otherwise, If your just buying reeds make sure they are disigned for the OEM mito reed cage...

If you are buying a whole boysenn reed cage for the mito, it should bolt right on plus some jetting changes to the carb

but I would recommend ditching the boyesen rad valve and getting a vforce too

2 Strokes Down Under

fitting Boysen reeds to a Mito

fitting Boysen reeds to a Mito

Re: fitting Boysen reeds to a Mito

Re: fitting Boysen reeds to a Mito

Re: fitting Boysen reeds to a Mito