Topics regarding Suzuki 2Strokes
Simplysideways
Newbie
Posts: 3 Joined: Thu Aug 01, 2013 10:12 pm
Post
by Simplysideways » Thu Aug 01, 2013 11:03 pm
Hi all, new member . I was wondering if anybody can help me out . I've just bought a lovely rgv250 with a tyga rear end and a full arrow exhaust system only problem is the cans are falling apart and I need to replace them. Does anyone know where I can get some replacement cans ? If I was to fit non arrow cans , would I have to get a retune ?
Many thanks , great site.
Cheers Ronan
hybrid
Site Admin
Posts: 1402 Joined: Tue Jun 16, 2009 2:34 pm
Location: Winsto, Sydney
Post
by hybrid » Fri Aug 02, 2013 4:13 pm
Cans should not be enough on their own to require a re-tune.
What is the bolt pattern on the cans?
TZMike cans are really nice @ US$99 each, which is what I run on both my bikes.
http://www.flickr.com/photos/10430020@N ... 954943500/
Tyga also do them, but they are more like US$130 each.
This is one of the TZMike cans fitted to my 350LC
And the 500
Might change them for black ones eventually, but he didn't have any in stock at the time.
RD350LC- RGV Mods, PWK28's
RZ500 - YZR Replica, PWK28's
Simplysideways
Newbie
Posts: 3 Joined: Thu Aug 01, 2013 10:12 pm
Post
by Simplysideways » Fri Aug 02, 2013 5:15 pm
Thanks for the reply Hybrid. The cans have a 3 bolt pattern so I figure the tyga or tzmike cans will do , I just need to work out the pitch.
Cheers
Simplysideways
Newbie
Posts: 3 Joined: Thu Aug 01, 2013 10:12 pm
Post
by Simplysideways » Fri Aug 02, 2013 7:17 pm
Hybrid, do you know where I can buy the tzmike cans from,does he have a site
EPApolice
Master Stroker
Posts: 842 Joined: Sun Apr 18, 2010 6:16 pm
Post
by EPApolice » Fri Aug 02, 2013 10:42 pm
You can buy Tyga cans direct from Tyga and they have the three bolt pattern you might just need to file them out a bit.
wheels999
Expert Stroker
Posts: 260 Joined: Fri Sep 04, 2009 9:44 am
Location: Sydney, NSW
Post
by wheels999 » Sat Aug 03, 2013 9:04 am
Simplysideways wrote: Hybrid, do you know where I can buy the tzmike cans from,does he have a site
I can confirm TZ Mike's exhaust cans are first rate. I've also purchased them in the past. He can do a range of sizes and finishes.
I'll inbox you his email address. I don't think he has a web presence besides the Flickr page.
Cheers, Markus.
matty
Occassional Stroker
Posts: 31 Joined: Sat Aug 01, 2009 7:50 pm
Location: Melb
Post
by matty » Sat Aug 03, 2013 8:09 pm
Might change them for black ones eventually, but he didn't have any in stock at the time.[/quote]
Hey Hybrid,
I like the red cans on your RZ, It's a point of difference that stands out against the yellow.
hybrid
Site Admin
Posts: 1402 Joined: Tue Jun 16, 2009 2:34 pm
Location: Winsto, Sydney
Post
by hybrid » Mon Aug 05, 2013 7:51 am
Simplysideways wrote: Hybrid, do you know where I can buy the tzmike cans from,does he have a site
Just email him... he only has the flickr page, not a regular website.
RD350LC- RGV Mods, PWK28's
RZ500 - YZR Replica, PWK28's
hybrid
Site Admin
Posts: 1402 Joined: Tue Jun 16, 2009 2:34 pm
Location: Winsto, Sydney
Post
by hybrid » Thu Aug 15, 2013 12:01 pm
Did you end up getting some cans?
Pics?
RD350LC- RGV Mods, PWK28's
RZ500 - YZR Replica, PWK28's