Page 1 of 1
RD & RZ Pipes. Differences?
Posted: Tue Jan 07, 2014 6:06 pm
by Greasemeup
Anybody know if the RD and RZ pipes have different flanges, will one bolt to the other cylinders?
Anyone got a set for an RZ350? Brisbane.
GMU..
Re: RD & RZ Pipes. Differences?
Posted: Wed Jan 08, 2014 11:48 am
by OzzyElsie
I'm 99% certain all - LC's, cigar RZ and 'can' RZ - are a bolt up fit
. I've put RZ 'cans' on an LC motor and chassis (a great pipe
).
There maybe a minor difference at the rear mount but it is easily modded.
Re: RD & RZ Pipes. Differences?
Posted: Wed Jan 08, 2014 1:26 pm
by pkay
Will a 250 set fit a 350?
Re: RD & RZ Pipes. Differences?
Posted: Wed Jan 08, 2014 1:26 pm
by pkay
Sorry if I wasn't so lazy I'd check the parts book myslef but I am at work......
Re: RD & RZ Pipes. Differences?
Posted: Wed Jan 08, 2014 2:25 pm
by Greasemeup
Thanks guys, I will just have to find an RD parts book now..
The RZ one says part 1 which is just the "header" without the "can" is part #
51L-14710-00
The assembly including the can is part #
51L-14?20-00 (my copy is missing some detail)
GMU..
Re: RD & RZ Pipes. Differences?
Posted: Thu Jan 09, 2014 8:44 am
by OzzyElsie
pkay wrote:Will a 250 set fit a 350?
They have different part #'s but otherwise they fit (as far as I know). If there are internal differences I'm not certain but they each work fine vickie verka.
Re: RD & RZ Pipes. Differences?
Posted: Thu Jan 09, 2014 1:26 pm
by pkay
Mate I have a set I may be in a psotion to sell. They are a can set from '86 RZ250. I'll check them again tonight to make sure they are if good condition and confirm.
Re: RD & RZ Pipes. Differences?
Posted: Fri Jan 10, 2014 5:25 am
by Greasemeup
Thanks Pkay,
PM me with the details if they are available.
Re: RD & RZ Pipes. Differences?
Posted: Fri Jan 10, 2014 1:20 pm
by pkay
Hiya
I had a look at them and compared them to my 1986 RZ250, they don't seem right and the cans are a lot smaller so I wont run the risk of selling you a dud. Sorry to be a pain
Re: RD & RZ Pipes. Differences?
Posted: Fri Jan 10, 2014 4:02 pm
by JonW
http://www.2smoked.com/Yamaha_1985_RZ25 ... rsion.html
Rocket opened a set of 250s and gutted them, maybe ask him about it if you want to fit them to a 350...