ANTS 350LC

Got some parts to sell?
User avatar
Antman
Master Stroker
Master Stroker
Posts: 473
Joined: Sun Aug 30, 2009 7:08 pm

ANTS 350LC

Post by Antman »

Thought I'd advertise the old girl here before e-bay and would prefer it to go to someone who dosen't want to butcher it for racing as its to good.

I have made some really nice sympathetic mods to the bike these are all reversable to put it back to standard and all stock parts are in very good cond.

I have had it since 1994 and purchased it in bits off a mate, during this time it has slowly been evolving.

1.Paint Atlantic blue(Mazda) is now 10years old however still very good minor crazing on ducktail bike has always been covered.

2.Motor 350 fully rebuilt by my self 4years ago only done 5,500km's since this bike only gets ridden about 10 times a year if that.
Motor spec.
Stock head, bores at 1mm with Tkr pistons,intakes slightly cleaned up MMT,crank rebuilt by Mike the bike, All new seals,bearing's,gaskets,Banshee clutch basket and plates with heavy duty springs has never slipped all were new.
This motor has never missed a beat really reliable always starts there is certainly more hp to be gained out of it but has always been fast enough for me.

Front End
1.replaced wheel bearings,standard discs with Nigel kimber adapter plates and R1 bluespots and R1 master cyclinder,steering damper,rebuilt Rz 84 forks, seals and proggressive springs,billet tops with 87 Rz clipons.Front tire Metz laser tech only done 500km's last stinky daze run.

2.Rear end

1.Replaced swinger bushes,rebuilt rear stock shock,braced swinger,new wheel bearings,cush drive rubbers,chain/sprokets, lasertech rear 500km only,cut rear guard.

2. Tarozzi rear sets,Rick roberts street chambers,tank has had a liner in it for 10years and never had a problem.

Parts included

1. rebuilt bottom end with Rz crank original motor, barrels on 1mm 350 just need hone,2 perfect heads.
2.5 cranks Lc,1 banshee,2 barrels on .75mm 350.
3.2 sets of cases with gearboxs,3 stators,many many side covers
4.Mint set of Rz 84 forks only done 30,000km's
5.Mint set of stock forks and top and bottom yokes
6.2 sets of clocks and 1 set of new covers never fitted.
7.Mint set of stock exhausts.
8.Mint set of panels never been on a bike 250 stickers
9.Basically there is a double of everything and more many many parts collected over 16years.
10.Brand new Zeeltronic never been fitted.
11. Pwk 28's new kits never been fitted plumbed into Lc cable.
This is a job lot only no seperating of parts ,I have all stock parts in perfect condition.

Most on this forum have seen it I would describe it not as a minter but in vgc condition.
This has been my pride and joy so Im in no hurry to sell it will come with 12months rego.And no I dont need the money for christmas :lol:

Pm me for sale price details

Cheers Ant
hybrid
Site Admin
Site Admin
Posts: 1401
Joined: Tue Jun 16, 2009 2:34 pm
Location: Winsto, Sydney

Re: ANTS 350LC

Post by hybrid »

Why you selling up Ant?
No more strokers?
RD350LC- RGV Mods, PWK28's
RZ500 - YZR Replica, PWK28's
User avatar
Antman
Master Stroker
Master Stroker
Posts: 473
Joined: Sun Aug 30, 2009 7:08 pm

Re: ANTS 350LC

Post by Antman »

No not at all ......................a 500 would be ideal :lol:
mr500
Newbie
Newbie
Posts: 7
Joined: Fri Oct 08, 2010 4:52 pm
Location: roxby downs

Re: ANTS 350LC

Post by mr500 »

how much are you looking for ant? i have another 500 thats in bits that i have very small thoughts of parting with...
User avatar
Antman
Master Stroker
Master Stroker
Posts: 473
Joined: Sun Aug 30, 2009 7:08 pm

Re: ANTS 350LC

Post by Antman »

Would prefer something togther and i believe its worth more than a 500 in pieces considering all the goodies you get with it if you read the post.

Pm me for details
twinrock
Master Stroker
Master Stroker
Posts: 300
Joined: Wed Nov 25, 2009 12:36 am

Re: ANTS 350LC

Post by twinrock »

i have owned and ridden laods of lcs this is a great example of a 350lc any mods that have been done have been done with patience and pricision.. i have been lucky enough to have ridden the bike a few times..and it feels better then new the best i have ridden,cols 350lc would be a close second...good luck with the sale
User avatar
Antman
Master Stroker
Master Stroker
Posts: 473
Joined: Sun Aug 30, 2009 7:08 pm

Re: ANTS 350LC

Post by Antman »

Cheers for the positive feedback mate all the best.
tpworld
Newbie
Newbie
Posts: 3
Joined: Thu Dec 30, 2010 4:22 pm

Re: ANTS 350LC

Post by tpworld »

Hi Ant,

I was Brookvale talking to a guy called Paul, who rides a CR500. He mentioned you had an LC350 for sale, I have been looking for a while and would be interested in seeing yours if it is not already sold.

How much are you selling it for? Any pictures?

Tim
User avatar
Antman
Master Stroker
Master Stroker
Posts: 473
Joined: Sun Aug 30, 2009 7:08 pm

Re: ANTS 350LC

Post by Antman »

Hi yep Ive got some photos if I send them to you would you be able to put them up on the site ? or anyone here that can help........
That would be a great help.

cheers
tpworld
Newbie
Newbie
Posts: 3
Joined: Thu Dec 30, 2010 4:22 pm

Re: ANTS 350LC

Post by tpworld »

Can you send pictures to my email in jpeg. format? What sort of price are you asking, and would you sell the bike without the parts?

tpworld007@gmail.com
User avatar
Antman
Master Stroker
Master Stroker
Posts: 473
Joined: Sun Aug 30, 2009 7:08 pm

Re: ANTS 350LC

Post by Antman »

E-mail sent.

Ant
tpworld
Newbie
Newbie
Posts: 3
Joined: Thu Dec 30, 2010 4:22 pm

Re: ANTS 350LC

Post by tpworld »

Pictures of Ants LC..
Attachments
p1060716.jpg
(94.62 KiB) Downloaded 174 times
p1060707.jpg
(95.76 KiB) Downloaded 174 times
p1060706.jpg
(87.54 KiB) Downloaded 174 times
User avatar
Antman
Master Stroker
Master Stroker
Posts: 473
Joined: Sun Aug 30, 2009 7:08 pm

Re: ANTS 350LC

Post by Antman »

Bike is on e-bay sorry guys..........


Ant
DOC03

Re: ANTS 350LC

Post by DOC03 »

Hey ANT,
You wouldnt have a spare set of 350LC cases without the usual chain damage before you sell the OL Girl ??
My spare im rebuilding is buggered with a hole in the bottom and the chain damage...
CHeers
Pete
User avatar
EPApolice
Master Stroker
Master Stroker
Posts: 842
Joined: Sun Apr 18, 2010 6:16 pm

Re: ANTS 350LC

Post by EPApolice »

I have a set if you want. I am in Sydney
Post Reply