An excuse for some pictures
Some time ago I bought a 1FN RZ, a VF21 RGV250 and a 31J RZ rolling frame. I've been collecting bits for the 31J as when I had a good look at it it seemed that someone had cherry picked a few bits but most of it was there. Only problem with buying a box of bits is you have to assemble it before you pull iot apart again to work out what is missing. So last weekend I bit the bullet and reassembled the beast. All that is now missing is the bikini fairing and the belly fairing. And I can't work out how the power valve servo mounts (ie does it have a cushion mount (not shown in the parts book) or not?).
Putting the RZ back together
Putting the RZ back together
- Attachments
-
- before engine fitting.jpg
- (63 KiB) Downloaded 8 times
-
- naked before clothes.jpg
- (76.63 KiB) Downloaded 9 times
-
- rhs 1.jpg
- (58.29 KiB) Downloaded 13 times
Re: Putting the RZ back together
Excellent, check the thread by Nick Sanders, he can supply new top fairings, excellent quality.
Ex UK, now in Adelaide. LC250/350. DT175. Shed full of sh1t in the vague form of dismantled rusty RD’s and RZ’s.
Re: Putting the RZ back together
I can have a look at my bike tonight regards your question on servo mounting
Ex UK, now in Adelaide. LC250/350. DT175. Shed full of sh1t in the vague form of dismantled rusty RD’s and RZ’s.
Re: Putting the RZ back together
That would be great thanks - on the 1986 RZ there is a grommet with a collar in the middle through which the mounty screw goes. Nut ne interested to seeif your si the same.BRG1200 wrote:I can have a look at my bike tonight regards your question on servo mounting